I will elaborate a little for other people reading this post. Links to a tool or file are in blue text. If any links are dead/don't work then let me know.
See attached photos. Do backup of camera firmware using (I got it from goprawn.com). Use your tool on the firmware backup fullimg.fex file to get a script.bin file.
Download and install. Files usually go in C:program files (x86)TechnowUberizer folder.
Place a copy of your script.bin file into that TechnowUberizer folder. Open UberizerOffline.bat file (so you don't need to connect an Android device). Choose option I, press enter, and option 9, press enter. Joy!.
Use option 10 in that menu listing to edit/view the script.fex file or look again in C:program files (x86)TechnowUberizer folder for script.fex and view it in Wordpad or (regular Notepad will show a single continuous line of text). In the option I menu listing, there is option 11 to convert script.fex back to script.bin. I haven't tried that yet but I suppose it works.UPDATE. Someone please help this all to confusing.
I have flashed many android phones, edited update zips, and scripts but I cant figure this out. I made a back up.flashed the no sound img shows successful but I'm stuck on the boot image. I tried fixedcalculations, newmoduleuniform, all same results.
I then flashed the q3h recovery and now back to boot image with sound but still sticks there. Can someone walk me through a fix or I can upload my back for someone make a flash img for me. I just want no boot sound and some tweaked camera settings. Phonenix shows device as 'fuxin4k30imx179-sdv but was using xdv app.
I chose the drone logos. However, I had to open and re-save jpg files with setting 100% compression, but not exceed 131072 bytes each file.
Radio Scripts V3 Full Rar Download
A magnitude 5 to 10 sharpen operation on each jpg looks nice and increases the file size slightly but still under 131072. Original compression was 97 or 98.
Used Image Information menu item in to get image file info. of my F60B Craine Sl603 camera, containing those drone photo boot/shutdown logos, but this time the front body is yellow and firmware date in info screen is 201605 14V4.0 (as opposed to black front body and 02160515V4.0).
I have two cameras now. ^^Also, I managed to change the camera's network name (SSID) and password in, under Settings, WiFi-Info. Give new SSID, old password and new password. Then Confirm. Then TURN OFF wifi on camera (up button).
Wait 5 seconds. Turn on wifi again on camera. I suppose any letters/numbers up to fifteen maybe sixteen characters long will work. ^^Someday I gotta determine how to change my imx179.ko, libCedarX.so, libvideoresizer.so, and other run files in 2-system.img (rootfs?) from goprawn.com forums but without bricking the cam.://.EDIT. Some days ago I received a generic from ebay similar to F60B crane sl603 but with. Its factory firmware has motion detection feature for video only.
So about 4 seconds of motion in%50 or more of the view usually triggers recording. Keep the camera motionless for a few seconds before you stop the recording; otherwise a new recording automagically starts.To flash this firmware directly to another F60B crane camera, the 0-uboot.img should be patched by writing your camera's script.bin using Uberizer 1.8 (see other post in this thread). This firmware could not be directly flashed to my F60B crane sl64 probably because lcddriver or whatnot was wrong. So I put together a mix recipe firmware pack that will flash right (at least for me), along with drone boot/shutdown logos.
In this filesystem, there are new files 'awmd' under /system/lib and /system/res for the new feature. Note: when using motion detection, your screen will have a running-man icon, and video files may be delete-protected in menu and in lock folder not in video folder on sdcard and file names will have SOS after datetime. This happened on one but not all of my F60B(R) cameras.download -Also a user on goprawn has F60R firmware with motion detection but for beike imx179s 20160604. Try this if you have a beike board or try to make a recipe mix.download -Nice 'addon' feature that maybe you can use? What do you think?
I had to use the in to make IMG file that is 21.7 MB size for flashing in PhoenixSuit. Flashing fullimg.fex from SD card inside the cam is too slooow. I guess stock firmware for your FJJ Fuxin (skiier logo)(from goprawn). Or try another from dashcamtalk.So if that works without modding it first, then afterwards mod the logos and make a new IMG and flash it in PhoenixSuit. My F60B backup files most likely won't work for your cam. Looking forward to seeing pics/videos of your logos. Now time to watch some sci-fi: Stranger Things, The Strain and Westworld.EDIT.
I had to use the in to make IMG file that is 22.7 MB size for flashing in PhoenixSuit. Flashing fullimg.fex from SD card inside the cam is too slooow. I guess stock firmware for your FJJ Fuxin (skiier logo)(from goprawn). Or try another from dashcamtalk.So if that works without modding it first, then afterwards mod the logos and make a new IMG and flash it in PhoenixSuit.
My F60B backup files most likely won't work for your cam. Looking forward to seeing pics/videos of your logos. Now time to watch some sci-fi: Stranger Things, The Strain and Westworld.EDIT.James. Hehe that sounds funny when I say it.like a Bond movie hehe. One more thing.
If your backup is only slightly different than other 'Q3H' FJJ fuxian (skier logo) firmwares, such as different drivers for LCD or whatnot, then yeah you should post your fullimg.fex and IMG Phoenix files here.